USD
EUR
GBP
CFA
- Description
Specifications
Volume:
216L
Principle:
Hot Air
Type:
Vertical, Others
main technical parameters:
| Model | power (V) | Temperature control accuracy |
Sterilization dimension（mm） |
Dimension(mm) | Electric power |
| WXY881-TG | 220 | ±1℃ | D600×W600×H600 | D800×W10500×H1050 | 4ＫＷ |
| Chamber divide layer,with 1 piece of 304 stainless steel barrier plates | |||||
Temperature Range:
| maximum temperature: | The highest temperature limit for this equipment:200 ℃ |
| The commonly used temperature: | Customers are commonly used temperature:RT+20~140 ℃ |
| Thermal insulation properties: | In furnace to achieve200,No more than the outer wall temperature45℃（room temperature+25℃） |
| test point: | At least from the tank material80mm,The door at least 80mm |
| test time: | After reaches the set temperature, (constant temperature state) 10 min |
| Temperatures are warm | Test set at 100 ℃, the temperature difference of tolerance is plus or minus 2 degrees |
| running noise:≤75db;The above indexes under the condition of normal pressure,no-load condition,is apart from the body wall space testing 1/6; | |
box structure:
| The machine structure: | Used on both sides of the air duct and the duct at the bottom of the y cycle,single-door,The latch with fixed horn handle,Beautiful, practical article ad opts high temperature foaming silicone seal near the door.At the bottom of the caster wheel fixed. |
| The lining ma | SUS304 mirror stainless steel plate with 1.2 mm thickness ,Steel sheet metal bending processing,Some do trough strengthen behind,To avoid heat deformation summon up. |
| Duct materials | SUS304 mirror stainless steel plate with 1.2 mm thickness, Steel plate wear torx hole，Sheet metal bending fixed. |
| Exterior | External A3 cold plunge into carbon steel plate with 1.2 mm thickness,after antirust treatment spraying the hammer paint dry，Resistance to dust. |
| air intake | To open the enclosure bottom ,diameter of 60 mm |
| gas vent | Open the system.after the pore ,diameter of 60 mm is adjustable |
| Enhance the solid frame | Use 3 # Angle steel, Angle steel and 4 part adopts trough strengthen sheet metal welding. |
| Insulation material | 120 k grade aluminum silicate fiber filled with high density, thermal insulation layer thickness is 90 mm. |
circulatory system：
| heated air circulation | Adopt level circulation wind, the wind supply. |
| Centrifugal rotor | Long axis centrifugal wind leaf, oven motor shock since the heat dissipation. |
| Power of fan | Power of fan:40W/220V. |
More other different sterilizer autoclave, please click following picture.
Shipping Information:
G.W: 0kg
Packing Size: 0m,0m,0m
Unit: Piece
Special: No
Name:
Email:
Whatsapp/Tel:
Message:
